Wehrs Axle Checker

Set your axle on and roll to check straightness. We also have a slot on the bottom to mark a straight line on new axles with a sharpie to keep an eye on axle twist.

Wehrs Suspension Measuring Plate

This is our suspension component measuring plate. Utilizing our heim center finder base design, we have made a sturdy 2-1/2'' wide plate with the center to center distance machine on it for...

Wehrs Small Suspension Measuring Plate

This is our suspension component measuring plate. Utilizing our heim center finder base design, we have made a sturdy 2'' wide plate that is machined with the length 3"-28" for quick...

Wehrs Fixed Measuring Plate

Inspired by Jason Feger, our all-new 'Fixed Measuring Plate' is designed to store measurements of all 4 rear suspension bars. The plate is 3" wide with center to center bar lengths machined on it...

5" Medium Drop Spring Cup OD Alignment

This is our medium drop cup that captures the spring by the OD. The cup keeps the spring straight through travel and allows you to run our WM165BO (see accessories tab) to let the spring twist...

Oil Dip Stick - Crate Motor

Crate motor dip stick used for checking oil levels inside the oil pan.

Oil Dip Stick - Blank

Blank dip stick for open/crate motor. Allows you to mark your own oil level line depending on preferences.

Transmission Dip Stick

Dip stick used for check fluid levels in your transmission.

Rear T-BAR Adjuster

Our T-Bar adjuster makes it easy to adjust the rear deck to your desired height. Adjusters fit 3/4'' square 16ga wall tube secured with a side bolt or can be welded into the tube. 3-1/2'' adjustment...

Clamp On Screw Jack Mount 1½'' Tube

Our clamp on screw jack mount for 1'' coarse screw jacks allows you to mount a screw jack without welding to your frame. Places jack bolt 2'' off center of tube. Mounts are available for...

Wehrs Steel Suspension Tubes - 3/4"

Machined .156'" wall DOM steel suspension tube 3/4"-16 thread with 15/16" hex on each end. Lasered with length and thread direction for your convenience.

Wehrs Steel Suspension Tubes - 5/8"

Machined thick wall DOM 5/8" suspension tube with 13/16" hex on each end. Lasered with length and thread direction for your convenience.