1/2 KING PIN BOLT

King Pin 1/2" OD 4.4" Length Nut not included Drilled shank for cotter pin or clip.

1/2" CASTLE NUT THIN

1/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.

1/2" CASTLE NUT THINK

1/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.

1/2" KING PIN 3.75 LONG

3/8" DRILLED 4.0" KINGPIN

AE8473 3/8" King Pin (4.0" with Drilled Shank)   Zinc Plated Grade 5 King Pin 3/8-24 Threaded End Use AE8536 Castle Nut (not included)

3/8-24 CASTLE NUT - ZINC

[AE8536] 3/8-24 Castle Nut (use with AE8473 King Pin)   3/8-24 Thread Zinc Plated

AFCO QM HUB BOLT 1/4-28 X 1 1/2" LONG FINE THREAD

DOWEL PINS

FLANGE NUT 1/4X28 LG HEAD

1/4" flanged smooth nut with a 1/2" head.

FLANGE NUT 1/4X28 SMOOTH

1/4" Flanged nut, smooth (each) (non-serrated) 1/4-28 Thread This is the industry standard wheel nut with a 7/16" hex that has been utilized for over 35 years.

FLANGE NUT 5/16X24 SMOOTH

5/16" Flanged nuts, smooth (each) (non-serrated)

PMI LEFT HAND SHORT SPINDLE 10 DEGREE

Left Hand Spindle 10 Degree KPI 1/2" ID Bearings Installed Straight 5/8" shaft....short, for LH oval use only 1.5" Tall Barrel Fits OEM Slack brand karts, but is a great universal spindle.