#35 CHAIN BREAKER

ARC3720 #35 Steel Chain Breaker   A premium breaker comparable in quality to the RLV #0765 breaker. Use the RLV #0767 replacement push pin Black Oxide coated Steel

1/2 KING PIN BOLT

King Pin 1/2" OD 4.4" Length Nut not included Drilled shank for cotter pin or clip.

1/2" ALUMINUM PEDAL GRIPS BLACK

1/2" CASTLE NUT THIN

1/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.

1/2" CASTLE NUT THINK

1/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.

1/2" KING PIN 3.75 LONG

1/4" X 1/4" AXLE KEYSTOCK

1/4" x 1/4" x 8" Axle Key stock

12 SLOT SPROCKET HOLDER

Aluminum 12 Slot Sprocket Rack

2 QT ALUMINUM SPRINT TANK

Aluminum Fuel Tank (2qt)   2 1/2" Wide, 9" Deep, 7 3/4" Tall Petcock is on RIGHT side of tank.

3/4" WHEEL HUB BEARING

3/4" hub bearing, usually intended for the backside of an extended right-front hub on an oval kart that utilizes the stepped size spindle.   Bearing is marked R12 RS This bearing has an OD of 1.625" This bearing will work as a replacement Jackshaft...

3/8" DRILLED 4.0" KINGPIN

AE8473 3/8" King Pin (4.0" with Drilled Shank)   Zinc Plated Grade 5 King Pin 3/8-24 Threaded End Use AE8536 Castle Nut (not included)

3/8-24 CASTLE NUT - ZINC

[AE8536] 3/8-24 Castle Nut (use with AE8473 King Pin)   3/8-24 Thread Zinc Plated