0-300 PSI SENSOR

0-300 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems.  Typical uses;...

1/4" EGT PROBE, OPEN TIP

Exhaust Gas Temperature is a critical indicator of the performance of a typical racing engine.

100 PSI SENSOR

0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems.  Typical uses; dome...

15FT PRESSURE SENSOR CABLE

Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot.

200 PSI SENSOR

0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems.  Typical uses;...

300 PSI 500 DEG PRESS AND TEMP SENS

LDM899TP combo sensor.   Perfect for converter pressure/temp.  outputs 0.5V to 4.5V signal for PSI.  0 to 300 psi  and 0-500*F in one sensor! 1/8" NPT 8.5 feet flying lead.  (Enough extra wire to cut and add connector...

4 BAR MAP

4 bar map sensor. (-1 bar to +3bar) -14.7 PSI to + 43.5 PSI Absolute pressure sensor -14.7 PSI = 0.5 Volts,   0 PSI = 1.46 Volts, 43.5 PSI = 4.5 Volts Outputs 0.5V to 4.5V Input 5V Accuracy 0.5% of full scale.  Heavy duty Stainless steel...

5/16 SENSOR

5/16"-24 hall effect speed sensor.   Triggered by magnets (Not ferrous material) 5/16"x24 body Built in LED light for easy setup Nickel plated Detection range 0.1MM to 10MM Flush mount Supply voltage 10V-30V Short circuited/reverse protection built...

5/16 SPEED SENSOR

5/16"-24 hall effect speed sensor.   Triggered by ferrous material (Not magnets) 5/16"x24 body Built in LED light for easy setup Stainless steel body Detection range 0.1MM to 1MM (0.004" to 0.04") Flush mount Supply voltage 10V-30V Short...

DOME PRESSURE SENSOR 100PSI

Oil filled Silicon 899 series.  Specifically designed for DOME PRESSURE  / boost controllers  and other applications that require the cleanest data possible.    0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel...

EFI THROTTLE BODY INTAKE ELBOW

This cast EFI intake elbow allows the use of GM LS throttle bodies on any intake manifold w/ the 4150 mounting flange. Slotted mounting holes & dual throttle cable mounting bracket bosses allow the elbow & throttle body to be mounted forward,...

HOLLEY EFI 8 CHANNEL CAN EGT KIT

Introducing the Holley EFI 8 Channel CANBus EGT Kit. Exhaust Gas Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on...