1.5 FRAME MOUNT FOR PANHARD BAR

These slick mounts let you change the length of your panhard bar with ease. Change the length 2-9/16'' by simply swapping bars out.This mount fits 1-1/2'' x 1-1/2'' square tube. This part number is our steel mount.

15.5 QUAD BENT TUBE

Designed for maximum clearance on the right front of a Dirt Modified race car. The quad bend gives 1.5″ of clearance on the right front frame horn. Features 5/8″-18 right and left hand threads.

2 PIECE CLAMP CHAIN HOLDER

Our re-designed limit chain axle clamp has a 3/8" clevis welded to a 1" wide clamp for increased strength.

ALUMINUM DOUBLE SIDE PANDARD SLIDER - 1.5"

Fits 1.5" square tube. One slot on centerline of tube and one slot inboard. Mount has 4-1/2'' total adjustment. Works with climber on arc to keep car tracking lined up. Climber hardware included.

ALUMINUM DOUBLE SIDE PINION MOUNT - QUICKCHANGE

Same arc as our WM205 with the extra arc slot on left side of the pinion. Mount adjusts easily with our climber nut. All hardware included.

ALUMINUM DOUBLE SLOT FRAME MOUNT - 2"

Fits 2''X2'' square tube. One slot on centerline of tube and one slot inboard. Mount has 4-1/2'' total adjustment. Works with climber on arc to keep car tracking lined up. Climber hardware included.

BIRDCAGE BEARING - 3.004 ID

BIRDCAGE BEARING - 3.008 ID

CLAMP ON STEEL PULL BAR BRACKET

Steel Clamp on pull bar bracket for 1-1/2" round tube. Holes are on an arc to keep pinion angle right when adjusting. Comes with 5/8" bolt and spacers to reduce 3/4" heim to bolt.

DOUBLE ADJUSTER - 3/4

3/4"-16 RH and LH double adjuster with 2-1/2" of thread in each direction. 6-1/2" overall length.

DOUBLE SHEAR BEARING BRAKE FLOATER - LEFT REAR

Dual bearing design fits GM metric caliper. Upper rod is offset 1'' back from center line and the holes are 5-1/2'' and 6-1/2'' up from center. This left rear double shear floater comes complete with clamp rings.

DOUBLE SLOT FRAME MOUNT - 1.5 INCH

Our new double slot steel climber frame mount for 1-1/2'' square can be flipped either way on the tube to give you three options for J-Bar lenghts in one mount. Mount comes with all hardware.