Weld On Screw Jack Mount

This is our weld on screw jack mount for 1"-8 thread screw jacks. Mount has three threaded holes that are 2-1/2" center to center. 

Wehrs Solid Bent Tubes

These are our 5/8'' bent suspension tubes for clearance for the suspension cage. Tubes are machined from solid 4140 billet steel tube for improved strength. Tubes have 13/16" hex on each end.

Tube Wrench Clamp for 5/8" Tube

Adjustments made easy! Grab your 1-1/4" wrench and turn the tube clamp to adjust your suspension tubes. Designed for use with our WM450 Suspension Tube Jam Nuts.Sold seperately is...

Nitro Bee Flat Mount

Nitro Bee Radio mount will mount your radio with Velcro or 1/8" rivets to your helmet or a flat surface.  Nitro Bee Radio not included with bracket.

Wehrs 5" Raised Spring Cup

This new bolt in 5" OD grab Raised cup moves the spring table up 1" from our WM404SC cup.  The OD grab spring cup centers the spring on the outside diameter to keep the...

5" Bolt In Drop Cup

This new bolt in 5" OD grab Drop cup moves the spring table down 1" from our WM404SC cup.  The OD grab spring cup centers the spring on the outside diameter to...

Wehrs Bearing Tool

Install/remove your cage bearings with ease with our all new bearing tool! Use a hammer to tap the handle while the tool does the work. Comes with handle, punch, and ring.

Clamp on Lead Mold Kit

Molding lead made easy! The NEW Clamp-On Lead Mold Kit comes with 1-1/4", 1-1/2", and 1-3/4" rods for various tubing sizes. The mold makes a 25-lb clamp-on style lead. Everything you need to add...

Wehrs Cleaning Kit for Slider

Cleaning kit for slider maintanence. Comes with tools, brushes, and grease; all organized in a custom-cut foam insert for your tool box drawer. Does NOT come with bushing or piston. Bushing and...

Wehrs 1" Tall Reduction insert - 1.125"

This is the 1-1/8" bore insert with 4% reduction in power for our 1" tall body.

Wehrs 1" Open Insert

This is the open insert with max power for our 1" tall body.

2" Tall Bore Reduction System

Our Jimmy Mars designed traction tuning carb spacer system allows you to reduce power by changing the insert when the track gets slick. This is our 2" tall Angled main body. Spacer is angled 4...