Front Suspension and Steering

Clamp on steering shaft mount for use with 1.75″ tubing and 3/4″ steering shaft. 7.5″ Long from center of tubing end to center of steering shaft mount.  

Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle.ALL11170.........Large Diameter 1", Small Diameter 7/16"7.15°, 1-1/2" Taper Per FootALL11172...........

Aluminum Can. 8" total height, 3" can diameter. -10AN Bottom port. -6AN Side return.  Includes aluminum mounting bracket.  3lbs total weight. 

Fits ball joint housings that use a 1.437" ball on the stud, including:22300, 22301, 22302, 22303, 22304, 22306, 22307, 22314, 22320, 22406, 22407, 22412SB, 22416, 22418, 22420, 22421, 22423, 22424, 22425, 22429

BALL JOINT PRECISION LOWER CHRYSLER STYLE +.500 - FITS K727 Replacement Studs

BALL JOINT PRECISION LOWER CHRYSLER STYLE WITH STEEL CAP +.500 - FITS K727 Replacement Studs

BALL JOINT PRECISION LOWER CHRYSLER STYLE - FITS K727 Replacement Studs

BALL JOINT, 22412 W/STL CAP Replacement Studs

Pickle forks suck! Our remover actually works. With the nut off the lower ball joint, simply place the remover between ball joint tips, apply pressure, tap the spindle, and the ball joint pops out.  You then flip tool over and add the extension to...