Quick view Aeromotive Fuel Systems 100 MICRON ORB 10 FILTER - BLACK MSRP: Now: $135.99 Add to Cart Compare Quick view Aeromotive Fuel Systems 100 MICRON ORB 10 FILTER - RED MSRP: Now: $129.00 Add to Cart Compare Quick view Low Doller Motorsports 100 PSI SENSOR MSRP: Now: $40.25 Add to Cart Compare Quick view Nitrous Outlet 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE MSRP: Now: $875.00 Add to Cart Compare SALE Quick view Nitrous Outlet 11+ 5.0 PLATE KIT NO BOTTLE MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view Low Doller Motorsports 150 PSI PRESSURE AND TEMP SENSOR MSRP: Now: $92.01 Compare Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Aeromotive Fuel Systems 100 MICRON ORB 10 FILTER - RED MSRP: Now: $129.00 Add to Cart Compare Quick view Low Doller Motorsports 100 PSI SENSOR MSRP: Now: $40.25 Add to Cart Compare Quick view Nitrous Outlet 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE MSRP: Now: $875.00 Add to Cart Compare SALE Quick view Nitrous Outlet 11+ 5.0 PLATE KIT NO BOTTLE MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view Low Doller Motorsports 150 PSI PRESSURE AND TEMP SENSOR MSRP: Now: $92.01 Compare Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Low Doller Motorsports 100 PSI SENSOR MSRP: Now: $40.25 Add to Cart Compare Quick view Nitrous Outlet 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE MSRP: Now: $875.00 Add to Cart Compare SALE Quick view Nitrous Outlet 11+ 5.0 PLATE KIT NO BOTTLE MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view Low Doller Motorsports 150 PSI PRESSURE AND TEMP SENSOR MSRP: Now: $92.01 Compare Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Nitrous Outlet 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE MSRP: Now: $875.00 Add to Cart Compare SALE Quick view Nitrous Outlet 11+ 5.0 PLATE KIT NO BOTTLE MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view Low Doller Motorsports 150 PSI PRESSURE AND TEMP SENSOR MSRP: Now: $92.01 Compare Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
SALE Quick view Nitrous Outlet 11+ 5.0 PLATE KIT NO BOTTLE MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view Low Doller Motorsports 150 PSI PRESSURE AND TEMP SENSOR MSRP: Now: $92.01 Compare Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Low Doller Motorsports 150 PSI PRESSURE AND TEMP SENSOR MSRP: Now: $92.01 Compare Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Low Doller Motorsports 15FT PRESSURE SENSOR CABLE MSRP: Now: $9.57 Add to Cart Compare Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Aeromotive Fuel Systems 1O MICRON MICROGLASS FILTER ELEMENT MSRP: Now: $42.80 Add to Cart Compare SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
SALE Quick view KSE Racing Products 20 TOOTH HTD PULLEY MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
SALE Quick view KSE Racing Products 20/22 PULLEY BELT GUIDE MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view Low Doller Motorsports 200 PSI SENSOR MSRP: Now: $40.12 Add to Cart Compare Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view AED Performance 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS MSRP: Now: $42.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 100 MICRON ORB 10 FILTER - BLACK P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $135.99 Add to Cart Compare Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 100 MICRON ORB 10 FILTER - RED P/N 12304: 100 Micron, ORB-10 Red Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For... MSRP: Now: $129.00 Add to Cart Compare Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 100 PSI SENSOR 0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses; dome... MSRP: Now: $40.25 Add to Cart Compare Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: Now: $875.00 Add to Cart Compare SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
SALE Quick view 11+ 5.0 PLATE KIT NO BOTTLE Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting... MSRP: $775.00 Was: $775.00 Now: $387.50 Add to Cart Compare Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 150 PSI PRESSURE AND TEMP SENSOR PN: 899404 outputs 0.5V to 4.5V signal for PSI. 0 to 150 psi and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever... MSRP: Now: $92.01 Compare Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 15FT PRESSURE SENSOR CABLE Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot. MSRP: Now: $9.57 Add to Cart Compare Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 1O MICRON MICROGLASS FILTER ELEMENT P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the... MSRP: Now: $42.80 Add to Cart Compare SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
SALE Quick view 20 TOOTH HTD PULLEY 20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. MSRP: $52.95 Was: $52.95 Now: $26.48 Add to Cart Compare SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
SALE Quick view 20/22 PULLEY BELT GUIDE Aluminum 20 tooth pulley belt guide used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. MSRP: $7.95 Was: $7.95 Now: $3.98 Add to Cart Compare Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 200 PSI SENSOR 0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems. Typical uses;... MSRP: Now: $40.12 Add to Cart Compare Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected ×
Quick view 2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable... MSRP: Now: $42.99 Add to Cart Compare 1 2 3 4 5 6 7 Compare Selected