15.5 QUAD BENT TUBE

Designed for maximum clearance on the right front of a Dirt Modified race car. The quad bend gives 1.5″ of clearance on the right front frame horn. Features 5/8″-18 right and left hand threads.

Billet Suspension Arm - 12"

This is our new Billet Bent Suspension Arm.   This 12" billet bar will withstand anything you throw at it with the billet machined I-Beam design for superior strength. NOT IMCA LEGAL

CLEARANCED BENT RADIUS RODS

Tie Rod, Bent, 7/8 in OD, 5/8-18 in Thread, Steel, Black Powder Coat, Universal

RADIUS ROD LENGTH CHECKER

This tool helps you set your radius rod lengths to the exact measurement you need. 

STEEL SWEDGE TUBES - 5/8"

STEEL SWEDGED RADIUS RODS. 5/8-18 FEMALE THREADS, 7/8 O.D. BLACK

STEEL SWEDGE TUBES - 3/4"

STEEL RADIUS RODS - 3/4-16 FEMALE THREADS, 1" O.D. BLACK

STEEL WELD IN TUBE END BUNGS

Steel weld-in tube ends. Available in 1/2-20 (1" .083wall tubing) 5/8-18 and 3/4-16 (1.25 .083 wall tubing)

Tube Wrench Clamp for 5/8" Tube

Adjustments made easy! Grab your 1-1/4" wrench and turn the tube clamp to adjust your suspension tubes. Designed for use with our WM450 Suspension Tube Jam Nuts.Sold seperately is our WM450W Stubby 1-1/4" wrench.

Wehrs Solid Bent Tubes

These are our 5/8'' bent suspension tubes for clearance for the suspension cage. Tubes are machined from solid 4140 billet steel tube for improved strength. Tubes have 13/16" hex on each end.

Wehrs Steel Suspension Tubes - 3/4"

Machined .156'" wall DOM steel suspension tube 3/4"-16 thread with 15/16" hex on each end. Lasered with length and thread direction for your convenience.

Wehrs Steel Suspension Tubes - 5/8"

Machined thick wall DOM 5/8" suspension tube with 13/16" hex on each end. Lasered with length and thread direction for your convenience.