Product Description
MD3 Adhesion Promoter Primer
The perfect surface prep for plastic
- Specifically engineered adhesion promoter assures proper paint bonding to our special plastic
- Other automotive grade primers on the market may not work at all or cause severe paint flaking
- Improves adhesion of vinyl by enhancing the bond between adhesive on the vinyl and the substrate, for a more durable, long-lasting application
- Comes in an aerosol spray can for quick and easy application
- A single can coats approximately 5 individual parts
3 STEP PROCESS FOR THE BEST VINYL ADHESION:
1.) CLEAN THE SURFACE
- We recommend that our plastic panels be cleaned with a general cleaner/degreaser, finish cleaning with Isopropyl Alcohol and a lint-free cloth.
2.) APPLY ADHESION PROMOTER
- Apply the MD3 Adhsion Promotor by spraying where your wrap will be applied. Make sure to coat the outside edges well.
3.) INSTALL YOUR WRAP
- The vinyl needs to cure for at least 24 hours for proper adhesion.
Tip: Using a heat gun over the entire wrap especially around the edges helps to bond the adhesive to the plastic.
