Spindles and Accessories

Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle.ALL11170.........Large Diameter 1", Small Diameter 7/16"7.15°, 1-1/2" Taper Per FootALL11172...........

Pickle forks suck! Our remover actually works. With the nut off the lower ball joint, simply place the remover between ball joint tips, apply pressure, tap the spindle, and the ball joint pops out.  You then flip tool over and add the extension to...

The 3-piece 1979-Up GM metric spindle is a re-creation of an OEM spec spindle in a newly forged, heat-treated steel design that is both stronger and lighter than the original. The unique three-piece construction provides for fast, convenient and...

Spindle Saver, IMCA Approved, Steel, Cadmium, GM Metric Spindles, Kit

Spindle, Stock Pin Height, Forged Steel, Black Paint, GM G-Body, Sold Each

Spindle, Stock Pin Height, IMCA Approved, Forged Steel, Black Paint, Ford Mustang II

Spindle Hardware, 5/8-18 in Thread, 1/2-13 in Thread, One 1 in Long Allen Head Bolt, Two 3 in Long Hex Head Bolt, Steel, Natural, Allstar 3 Piece Spindles, Kit

Steering Arm, Steel, Natural, GM Metric Spindles, Each

Modular design 3-piece Mustang II style spindle features a separate spindle body with bolt-on caliper bracket and steering arm for easy and affordable repairs. Spindle uses a GM metric brake rotor, bearings and brake caliper while combining the features...

Steering Arm, Steel, Natural, Mustang II Spindles, Each

Spindle Nut, Washer / Cotter Pin

This new Travis Roth tool lets you instantly know after you crash if you need to change your spindle. Screws on your 1/2" fine thread upper ball joint and plunger points to center of lower ball joint if the spindle is straight. Bent spindle...