5/8" Double Adjuster Stainless

Has a 1/2'' center with 1-3/4'' thread on each end.

CLEARANCED BENT RADIUS RODS

Tie Rod, Bent, 7/8 in OD, 5/8-18 in Thread, Steel, Black Powder Coat, Universal

DROPPED STEEL TIE-ROD TUBES

Welded Dropped tie rod tubes for RF tie rod assemblies. 5/8 thread.  

RADIUS ROD LENGTH CHECKER

This tool helps you set your radius rod lengths to the exact measurement you need. 

STEEL SWEDGE TUBES - 5/8"

STEEL SWEDGED RADIUS RODS. 5/8-18 FEMALE THREADS, 7/8 O.D. BLACK

STEEL SWEDGE TUBES - 3/4"

STEEL RADIUS RODS - 3/4-16 FEMALE THREADS, 1" O.D. BLACK

STEEL WELD IN TUBE END BUNGS

Steel weld-in tube ends. Available in 1/2-20 (1" .083wall tubing) 5/8-18 and 3/4-16 (1.25 .083 wall tubing)

WEHRS LF TIE ROD ASSEMBLY

This is our Left Front tie rod with a short LH stock inner. This assembly uses our thick wall DOM machined suspension tube with a 13/16" hex on each end. The heim has a zerk for easy lubrication and comes with a dust cap. Have your own 5/8" Heim and...

Wehrs Solid Bent Tubes

These are our 5/8'' bent suspension tubes for clearance for the suspension cage. Tubes are machined from solid 4140 billet steel tube for improved strength. Tubes have 13/16" hex on each end.

Wehrs Steel Suspension Tubes - 5/8"

Machined thick wall DOM 5/8" suspension tube with 13/16" hex on each end. Lasered with length and thread direction for your convenience.

WEHRS TUBULAR RF TIE ROD ASSEMBLY

This is our complete RF tubular tie rod with a short LH stock inner. Tube has a 13/16" hex on each end like our 5/8" suspension tubes. Tie rod assembly comes with greasable heim with dust cap on spindle side and short LH stock inner for center...