1/2 KING PIN BOLT

King Pin 1/2" OD 4.4" Length Nut not included Drilled shank for cotter pin or clip.

1/2" CASTLE NUT THIN

1/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.

1/2" CASTLE NUT THINK

1/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.

1/2" KING PIN 3.75 LONG

3/4" WHEEL HUB BEARING

3/4" hub bearing, usually intended for the backside of an extended right-front hub on an oval kart that utilizes the stepped size spindle.   Bearing is marked R12 RS This bearing has an OD of 1.625" This bearing will work as a replacement Jackshaft...

3/8" DRILLED 4.0" KINGPIN

AE8473 3/8" King Pin (4.0" with Drilled Shank)   Zinc Plated Grade 5 King Pin 3/8-24 Threaded End Use AE8536 Castle Nut (not included)

3/8-24 CASTLE NUT - ZINC

[AE8536] 3/8-24 Castle Nut (use with AE8473 King Pin)   3/8-24 Thread Zinc Plated

5/8" WHEEL HUB BEARING

5/8" Hub Bearing Bearing is marked 99502H OD is 1.375" This bearing is not intended for use in Douglas DSM wheels.

DOWEL PINS

HUB BOLT

MCP MASTER CYLINDER CAP

MCP Master Cylinder Cap

MCP MASTER CYLINDER REBUILD KIT

Std. Master Cyl. Rebuild Kit Fits Original Cast M/C as well as the new Billet 18875 M/C Dust Boot may need trimmed on top for new Billet M/C