100 MICRON ORB 10 FILTER - BLACK

P/N 12324: 100 Micron, ORB-10 Black Fuel Filter An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For...

100 PSI SENSOR

0-100 PSI pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems.  Typical uses; dome...

11+ 5.0 HARDLINE PLATE KIT W 10LBS BOTTLE

Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting...

11+ 5.0 PLATE KIT NO BOTTLE

Max Flow 400+ HP Billet Aluminum Plate Fits Stock 11-17 5.0L Coyote and Boss Intakes 2011-17 Mustang Fuel Rail Adapter Included Custom Solenoid Brackets and Hard Lines All Hardware, Electric, and Jetting Included E85 Compatible With Different Jetting...

150 PSI PRESSURE AND TEMP SENSOR

PN: 899404  outputs 0.5V to 4.5V signal for PSI.  0 to 150 psi  and 0-500*F in one sensor! Same exact size as the standard 100 psi sensor 1/8" NPT 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever...

15FT PRESSURE SENSOR CABLE

Fits all Lowdoller pressure sensors and map sensors. *Roughly 15' ft long cable Includes GT150 3 pin connector and RB290 boot.

1O MICRON MICROGLASS FILTER ELEMENT

P/N 12650 10-M Micro-glass Replacement ElementService element for Aeromotive Billet, in-line filtersFits all 2″ OD x 5-1/2″ long ORB-10 filter housings.Includes new housing o-ring to reseal the filter assembly. Suitable for use on the...

20 TOOTH HTD PULLEY

20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. 

200 PSI SENSOR

0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems.  Typical uses;...

2BBL CARBURETOR REBUILD KIT - 2300 SERIES CARBS

AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable...

3 PORT SENSOR MOUNT

3 port remote sensor manifold All Ports are 1/8" NPT  Port Isolation left to right.  *Includes (6) internal hex 1/8" NPT plugs *Includes rubber isolation mounts and M6 socket head cap screws.  ***Pneumatic fittings sold separately***

300 PSI 500 DEG PRESS AND TEMP SENS

LDM899TP combo sensor.   Perfect for converter pressure/temp.  outputs 0.5V to 4.5V signal for PSI.  0 to 300 psi  and 0-500*F in one sensor! 1/8" NPT 8.5 feet flying lead.  (Enough extra wire to cut and add connector...